China SABIC LEXAN HPS1 Manufacturer, Supplier, Factory

With the popularity of electric vehicles around the world, the technical requirements for key components are also increasing.

First plastic gas tank for commercial vehicles made of BASF's high-performance Ultramid® polyamide, which weighs up to 20 percent less than an aluminum alternative

Facing rising material costs, manufacturers can significantly cut expenses by switching from traditional painted or two-shot molded automotive B/C pillar trims to high-gloss PC/ASA/PMMA—a paint-free, single-shot solution. This eliminates painting defects, reduces equipment needs, and saves 101 RMB per vehicle (20M RMB/year at scale), while improving heat resistance and design flexibility. Success depends on material-performance alignment, process optimization, and supplier collaboration. Strategic material substitution, not just cheaper alternatives, drives sustainable cost reduction.

SABIC DU242 PEI: The Perfect Balance of High Flow and Low-Temperature Toughness SABIC ULTEM™ DU242 is a polyetherimide (PEI) blend engineered for complex parts and demanding environments. Its key strengths lie in the unique combination of high flowability (for easy processing of thin-wall, intricate geometries) and enhanced low-temperature impact resistance, while maintaining a Heat Deflection Temperature of 160°C and UL94 V-0 flame rating. As a comprehensive enterprise integrating science, industry, and trade, we not only supply this high-performance material but also leverage our technical team to provide full-chain support—from product design and material selection to molding process optimization—empowering your innovations in automotive, electronics, industrial, and other sectors.

CYCOLOY™ CX7240 is a high-performance, non-halogen flame retardant PC/ABS alloy from SABIC. It combines PC’s heat resistance and impact strength with ABS’s excellent flowability, achieving UL 94 V-0 rating down to 0.75 mm thin wall while complying with RoHS and REACH. With a density of 1.19–1.20 g/cm³, MFR of 15–18 g/10min, tensile modulus of 2600 MPa, and water absorption of only 0.20%, it delivers balanced rigidity, toughness, and dimensional stability. Ideal for thin-wall precision parts in electronics & electrical housings, rail transit, medical devices, and smart appliances. Its halogen-free system produces low smoke and low corrosive gases, solving key challenges such as thin-wall flame retardancy failure, halogen compliance risk, and narrow processing windows. CX7240 is a reliable enabler for lightweight, high-safety designs.

SABIC ULTEM™ 2310 is a 30% glass fiber-reinforced polyetherimide (PEI) resin that combines excellent flowability, ultra-high strength (tensile strength up to 169 MPa), and inherent flame retardancy (UL94 V0 & 5VA). It features a heat deflection temperature of 210–220°C, continuous use from -160°C to 180°C, and very low mold shrinkage (0.2%–0.6%). The medical grade (HU2310) offers ISO 10993 or USP Class VI biocompatibility and withstands multiple sterilization methods. Ideal for medical devices, high-temperature connectors, semiconductor tooling, and aerospace/automotive components, ULTEM™ 2310 is the all round ace for demanding injection molding applications.