China BASF Ultradur B4300G6LT Manufacturer, Supplier, Factory

First plastic gas tank for commercial vehicles made of BASF's high-performance Ultramid® polyamide, which weighs up to 20 percent less than an aluminum alternative

Injection molding often encounters burn marks, a critical defect that severely impacts product appearance and quality. This article deeply analyzes the root causes of burn marks and proposes systematic countermeasures.

——Analysis of Keihin's IPM Housing Technological Innovation Based on LAPEROS® S135

SABIC DU242 PEI: The Perfect Balance of High Flow and Low-Temperature Toughness SABIC ULTEM™ DU242 is a polyetherimide (PEI) blend engineered for complex parts and demanding environments. Its key strengths lie in the unique combination of high flowability (for easy processing of thin-wall, intricate geometries) and enhanced low-temperature impact resistance, while maintaining a Heat Deflection Temperature of 160°C and UL94 V-0 flame rating. As a comprehensive enterprise integrating science, industry, and trade, we not only supply this high-performance material but also leverage our technical team to provide full-chain support—from product design and material selection to molding process optimization—empowering your innovations in automotive, electronics, industrial, and other sectors.

In the engineering plastics industry, color difference control has moved far beyond visual judgment. The L, a, b values form the internationally recognized three-dimensional coordinate system for color, representing lightness, red-green hue, and yellow-blue hue respectively. Understanding these three numbers is the key to correctly interpreting colorimeter reports and pinpointing the root cause of color deviation—whether it comes from material batch variation, drying process instability, or injection molding parameter drift.

SABIC CY6414-701 is a halogen-free flame-retardant PC/ABS alloy from the CYCOLOY™ series. It offers high heat resistance (HDT 118°C at 1.8MPa, Vicat 135°C), high flowability (MFR 14g/10min at 260°C/5.0kg), and excellent impact strength (notched Izod 800J/m). The non halogen (chlorine and bromine free) flame retardant system achieves UL94 V 0 at 1.2mm and 5VB at 2.5mm, meeting strict environmental regulations. With low CTE and good dimensional stability, it is ideal for thin wall and complex parts. Typical applications include E/E enclosures, automotive interior/exterior components, and LED lighting housings. Proper pre drying (90 110°C, 2 4h) is required before processing to ensure optimal performance.