China SABIC Thermocomp LF004 Manufacturer, Supplier, Factory

Plastic DURACON POM (polyoxide), due to its outstanding mechanical properties and processing performance, has become an important material for many high-precision and wear-resistant parts, and its application fields are very wide.

The shrinkage rate of plastic reflects the degree of dimensional reduction in a plastic part after it is removed from the mold and cooled. Factors affecting plastic shrinkage include the type of plastic, molding conditions, and mold structure. Different plastics exhibit varying shrinkage rates. Additionally, the shrinkage rate is significantly influenced by the part's shape, complexity of internal structure, and the presence of inserts.

Engineering plastic modification is like "turning stone into gold," leveraging three core technologies—additives, fillers, and flame retardants—to dramatically enhance resin performance. Additives enable toughening, compatibilization, and anti-aging with minimal dosage; fillers like glass fibers, PTFE for lubrication, or minerals balance rigidity, toughness, and cost; flame retardants provide self-extinguishing safety. As an integrated enterprise specializing in trade, application development, and molding, we deliver tailored engineering plastic solutions through precision modification formulations.

At the 2026 CCTV Spring Festival Gala, robots evolved from dancing Yangge to executing backflips—more agile, more dynamic. Behind this leap is a "skeletal evolution" driven by specialty engineering plastics. PEEK is 70% lighter than steel, offering high strength, self-lubrication, and micron-level precision for flexible, accurate joints. PPS provides heat and chemical resistance, ensuring electrical system safety. "Replacing steel with plastics" solves range anxiety and enables cost-effective mass production through injection molding. From walking to running and jumping, every step in humanoid robot evolution relies on breakthrough materials.

SABIC ULTEM™ 1000-1000MC is a medical-grade polyetherimide (PEI) specialty engineering plastic designed to meet the demanding requirements of medical devices and high-end manufacturing. It offers high strength, high rigidity, and good ductility, with a tensile strength of 105 MPa. The material operates continuously at 170°C and withstands hundreds of cycles of autoclave, EtO, and gamma sterilization. It complies with ISO 10993 and USP Class VI biocompatibility standards, and features excellent chemical resistance, low smoke emission, and UL94 V-0 flammability rating. With medical-compliant (MC) lot control and full traceability, ULTEM 1000-1000MC is the benchmark choice for surgical instruments, diagnostic equipment, drug delivery devices, and more.

CYCOLOY™ CX7240 is a high-performance, non-halogen flame retardant PC/ABS alloy from SABIC. It combines PC’s heat resistance and impact strength with ABS’s excellent flowability, achieving UL 94 V-0 rating down to 0.75 mm thin wall while complying with RoHS and REACH. With a density of 1.19–1.20 g/cm³, MFR of 15–18 g/10min, tensile modulus of 2600 MPa, and water absorption of only 0.20%, it delivers balanced rigidity, toughness, and dimensional stability. Ideal for thin-wall precision parts in electronics & electrical housings, rail transit, medical devices, and smart appliances. Its halogen-free system produces low smoke and low corrosive gases, solving key challenges such as thin-wall flame retardancy failure, halogen compliance risk, and narrow processing windows. CX7240 is a reliable enabler for lightweight, high-safety designs.