SABIC NORYL PPO Unfilled High Heat Resistance

If you are interested in SABIC NORYL PPO Unfilled High Heat Resistance plastic products, please contact Visa Plastics. Visa Plastics adheres to the standards of reassuring quality, reasonable price and dedicated service.

Noryl* Resin 844 Asia Pacific: COMMERCIAL

Medium heat PPO/HIPS alloy used in the automotive industry

Noryl* Resin 534 Americas: COMMERCIAL

High heat, unreinforced.

Noryl* Resin 115 Asia Pacific: COMMERCIAL

/

Noryl* Resin 731 Americas: COMMERCIAL

PPE+PS blend. Unfilled. NSF listed for potable water use in several colors (Standard 61). FDA compliant (restrictions apply). UL94 HB rated. Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications: valve components, water pump housings, etc. This grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HN731A

Noryl* Resin INT2002 Asia Pacific: COMMERCIAL

/

Prevex* Resin PVX0800 Americas: LIMITED

USE General purpose V0 grade

Noryl* Resin V095 Europe-Africa-Middle East: COMMERCIAL

SABIC NORYL PPO Unfilled High Heat Resistance Noryl* V095 resin is a modified PPE-PS blend that exhibits an excellent balance of non chlorinate, non brominate flame retardance, medium heat/high flow and low specific gravity for light weight parts. Noryl V095 is available in custom colors and may be an excellent material candidate for applications requiring light weight parts, good flame performance and excellent processability

Noryl* Resin PX500 Asia Pacific: COMMERCIAL

Noryl PX500 is an unfilled modified polyphenylene ether resin capable of multiple conversion routes. This resin is designed for lower odor during conversion than many standard modified PPE resins. SABIC NORYL PPO Unfilled High Heat Resistance Noryl PX500 provides an exceptional balance of high heat performance and dimensional stability with flow and may be an excellent material candidate for IC tray applications

Noryl* Resin PX300 Asia Pacific: COMMERCIAL

Low odor grade for IC tray application

Noryl* Resin PVX0901 Asia Pacific: DEVELOPMENTAL

Multi purpose V1 grade

Noryl* Resin PX6120 Americas: COMMERCIAL

Noryl PX6120 is an unfilled material with good flow, high Impact and chemical resistance against cleaners. Noryl PX6120 is developed for personal care appplications

Noryl* Resin EXNL0143 Americas: COMMERCIAL

SABIC NORYL PPO Unfilled High Heat Resistance Noryl PX1736 Resin is a blend of PPE and PS, that provides high strength, increased heat resistance, and translucency. The material has melt strenght suitable for Extrusion and Blow Molding applications. Typical applications include High Performance Applications.

Noryl* Resin IN120 Europe-Africa-Middle East: COMMERCIAL

NORYL IN120 is an unfilled material with a Vicat B/120 of 125 ºC according ISO 306. NORYL IN120 has been developed for the interior automotive

Noryl* Resin 731H Americas: COMMERCIAL

High gloss, general purpose grade. 130C (266F) DTUL. UL 94 HB rated. For multiple plugs, wine filter plates, etc

Noryl* Resin EX130 Asia Pacific: DEVELOPMENTAL

/

Noryl* Resin EFN4230 Asia Pacific: DEVELOPMENTAL

/

Noryl* Resin N802 Asia Pacific: DEVELOPMENTAL

/

Noryl* Resin HH180 Americas: COMMERCIAL

Noryl* HH180 is a high heat, unfilled modified polyphenylene ether resin with a Vicat B/120 temperature of 185 deg C. Noryl HH180 is only available in color 80365.

Noryl* Resin PX1181 Europe-Africa-Middle East: COMMERCIAL

Noryl* PX1181 PolyPhenylene Oxide (PPO*) + Polystyrene (PS) resin is an unfilled , injection moldable grade, with improved impact performances, an ISO 306 Vicat B/120 temperature of 120 deg C and a UL94 HB rating . This grade has been developed for automotive interior applications requiring standard ECE dashboard impact test. SABIC NORYL PPO Unfilled High Heat Resistance Noryl PX1181 is an opaque material available in limited colors only.

Noryl* Resin PX1180 Europe-Africa-Middle East: COMMERCIAL

Noryl* PX1180 PolyPhenylene Oxide (PPO*) + Polystyrene (PS) resin is an unfilled , injection moldable grade, with improved impact performances, an ISO 306 Vicat B/120 temperature of 120 deg C and a UL94 HB rating . This grade has been developed for automotive interior applications requiring standard ECE dashboard impact test. SABIC NORYL PPO Unfilled High Heat Resistance Noryl PX1180 is only available in black color

Noryl PPOSE100HX Americas: Commercial grade.

Improved productivity and reliability. Chlorine-free and bromine-free flame retardant.

Noryl PPON225X Americas: Commercial grade.

PPE+PS mixture. Unfilled. Halogen-free flame retardant performance. UL94 V0/5VA. UL746C F1. Dielectric strength. Suitable for indoor/outdoor applications in the electronics/electrical market.

Noryl PPOPC180X compound:

Non-brominated, non-chlorinated, flame retardant. V-1/5VA rating. Heat distortion temperature (HDT): 175°F (90°C). Improved productivity and reliability.

Noryl PPON190X compound:

High impact strength. Deflection temperature under load (DTUL): 190°F (88°C). UL94 V-0/5VA rated. (Non-chlorinated/non-brominated, flame retardant). Relative thermal index of mechanical impact at 80°C.

Noryl PPOPX9406 compound:

Non-brominated, non-chlorinated, flame retardant. Improved productivity and reliability. Heat distortion temperature: 252°F. UL94 V-0 rated. For power applications.

Noryl PPOPX9406P compound:

Linear thermal expansion coefficient, in the flow direction, from -30 to 30°C is 7.0E-5 cm/cm/°C, ASTM E831.

Noryl PPOSE1X compound:

Improved productivity and reliability. Non-brominated, non-chlorinated, flame retardant. Heat distortion temperature: 244°F.

Noryl PPOSE100X compound:

Non-brominated, non-chlorinated, flame retardant resin. Improved productivity and reliability. Heat distortion temperature: 199°F.

Noryl PPOPX1007 compound:

Melt temperature >210°C.

Noryl PPOPX2907 Asia Pacific: Under development.

/

Noryl PPOPX2801Z Asia Pacific: Under development.

/

Noryl PPOPX2790 Asia Pacific: Under development.

/

Noryl PPO PX2790C Asia Pacific: Commercial grade.

PPE/HIPS unfilled, flame retardant grade V1, 90°C.

Noryl PPOPPO534 Asia Pacific: Commercial grade.

/

Noryl PPON1052P Asia Pacific: Commercial grade.

/

Noryl PPON1050 compound.

/

Noryl PPOSE1V Asia Pacific: Commercial grade.

/

Noryl PPON225Z Asia Pacific: Under development.

/

Noryl PPON850 compound.

/

Noryl PPON1150 Asia Pacific: Commercial grade.

/

Noryl PPON1150 Asia Pacific: Commercial grade.

/

Noryl PPOEXNL0357 Americas: Commercial grade.

/

Noryl PPOEXNL0357 Americas: Commercial grade.

/

Noryl PPOHF185 Europe, Africa, Middle East: Commercial grade.

NORYL HF185 is an unfilled, halogen-free (according to VDE/DIN 472 part 815), flame retardant and highly flowable NORYL grade.

Noryl PPOTCN8222 Asia Pacific: Under development.

/

Noryl PPOSEH80 Asia Pacific: Commercial grade.

/

Noryl PPON1250 Americas:

Limited use. SABIC NORYL PPO Unfilled High Heat Resistance Noryl N1250 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and good flowability, this resin also uses chlorine-free and bromine-free flame retardant additives, achieving UL94 V0 flame retardant rating at 0.75 mm thickness and V0-5VA at 2.5 mm thickness, with a density of 1.11 g/cm³. The Vicat heat resistance temperature of Noryl N1250 is 137°C. It may be an excellent material choice for applications that require electrical insulation properties, low moisture absorption, low warping and thin-wall flame retardancy.

Noryl PPOLEN2231 Asia Pacific: Under development.

/

Noryl PPOLEN2231 Asia Pacific: Under development.

/

Noryl PPOLEN2211 Asia Pacific: Commercial grade.

/

Noryl PPOSE101X compound:

Easy-flowing, medium heat-resistant, flame retardant, impact-modified PPO/HIPS alloyed polymer. Only available in white.

Noryl PPON190A compound:

Low heat, flame retardant PPO/HIPS alloyed polymer. Only internal combustion products. Non-UL recognized material.

Noryl PPO NH7010HF Americas: Commercial grade.

Noryl NH7010HF resin is a modified PPE-PS mixture with non-halogenated flame retardant, high heat resistance, good flowability and a good balance of low specific gravity for lightweight parts. This resin is available in custom colors and is suitable for injection molding.

Noryl PPO RN0712 Americas: Commercial grade.

Noryl RN0712 is an unfilled injection moldable modified polyphenylene ether resin based on post-consumer recycled (PCR) content and contains at least 37% PCR styrene series resin content. Designed for good dimensional stability and high flowability, this resin also uses chlorine-free and bromine-free flame retardant additives and has a density of 1.1 g/cm³. SABIC NORYL PPO Unfilled High Heat Resistance Noryl RN0712 may be an excellent material choice for flat panel TV housing applications that require good rheological properties, heat resistance, hydrolysis resistance and low density.

Noryl PPO844 Asia Pacific: Commercial grade.

Medium heat-resistant PPO/HIPS alloy for the automotive industry.

Noryl PPO534 compound:

High temperature resistant, unfilled type.

Noryl PPO115 Asia Pacific: Commercial grade.

/

Noryl PPO731 compound:

General-purpose grade. UL94 rated HB value.

Noryl PPOINT2002 Asia Pacific: Commercial grade.

Prevex Resin PVX0800 Americas:

Limited use. General-purpose V0 grade.

Noryl PPOV095 Europe, Africa, Middle East: Commercial grade.

Noryl V095 resin is a modified PPE-PS mixture that offers a good balance between non-chlorinated, non-brominated flame retardancy, medium heat resistance/high flowability and low specific gravity for lightweight parts. Noryl V095 is available in custom colors and may be an excellent material choice for applications that require lightweight parts, good flame retardancy and excellent processing performance.

Noryl PPOPX500 Asia Pacific: Commercial grade.

Noryl PX500 is an unfilled modified polyphenylene ether resin that can be converted by multiple routes. Compared to many standard modified PPE resins, this resin has lower odor during conversion. SABIC NORYL PPO Unfilled High Heat Resistance Noryl PX500 offers an excellent balance between high heat resistance, dimensional stability and flowability and may be an excellent material choice for integrated circuit tray applications.

Noryl PPOPX300 Asia Pacific: Commercial grade.

Low odor grade for integrated circuit tray applications.

Noryl PPOPVX0901 Asia Pacific: Under development.

Multipurpose V1 grade.

Noryl PPOPX6120 Americas: Commercial grade.

Noryl PX6120 is an unfilled material with good flowability, high impact resistance and chemical resistance to cleaners. Noryl PX6120 is developed for personal care applications.

Noryl PPOEXNL0143 Americas: Commercial grade.

Noryl PX1736 resin is a blend of PPE and PS that provides high strength, improved heat resistance and translucency. This material has melt strength suitable for extrusion and blow molding applications. Typical applications include high-performance applications.

Noryl PPOIN120 Europe, Africa, Middle East: Commercial grade.

NORYL IN120 is an unfilled material with a Vicat softening temperature B/120 of 125°C according to ISO 306. NORYL IN120 is developed for automotive interiors.

Noryl PPO731H compound:

High gloss, general-purpose grade. Deflection temperature under load: 130°C (266°F). UL 94 rated HB value. Used for multi-purpose sockets, alcohol filter plates, etc.

Noryl PPOEX130 Asia Pacific: Under development.

/

Noryl PPOEFN4230 Asia Pacific: Under development.

/

Noryl PPON802 Asia Pacific: Under development.

/

Noryl PPOHH180 Americas: Commercial grade.

Noryl HH180 is a high heat-resistant, unfilled modified polyphenylene ether resin with a Vicat softening temperature B/120 of 185°C. Noryl HH180 is only available in color 80365.

Noryl PPOPX1181 Europe, Africa, Middle East: Commercial grade.

Noryl PX1181 polyphenylene ether (PPO)+polystyrene (PS) resin is an unfilled, injection moldable grade with improved impact performance, a Vicat softening temperature B/120 of 120°C according to ISO 306 and a UL94 HB flame retardant rating. This grade is developed for automotive interior applications that require standard ECE dashboard impact testing. Noryl PX1181 is an opaque material and only available in limited colors.

Noryl PPO PX1180 Europe, Africa, Middle East: Commercial grade.

Noryl PX1180 polyphenylene ether (PPO)+polystyrene (PS) resin is an unfilled, injection moldable grade with improved impact performance, a Vicat softening temperature B/120 of 120°C according to ISO 306 and a UL94 HB flame retardant rating. This grade is developed for automotive interior applications that require standard ECE dashboard impact testing. Noryl PX1180 is only available in black.

Noryl* Resin PX1134 Europe-Africa-Middle East: COMMERCIAL

NORYL PX1134 is an unfilled material with a Vicat B/120 of 120ºC according ISO 306. NORYL PX1134 offers improved impact performance to meet the standard ECE dashboard impact tests in the automotive industry. Available in several colours, which meet the various automotive standards for interior colours

Noryl* Resin PX1112 Europe-Africa-Middle East: COMMERCIAL

NORYL PX1112 is an unfilled medium heat resistant material. This grade offers improved impact resistance to meet the ECE-dashboard standard

Noryl* Resin N110S Europe-Africa-Middle East: COMMERCIAL

NORYL N110S is an unfilled material with a Vicat B/120 of 115 ºC according ISO 306. NORYL N110S has been listed for potable water

Noryl* Resin 725A Europe-Africa-Middle East: COMMERCIAL

NORYL 725A is an unfilled material, with a Vicat B/120 of 135ºC according ISO 306. NORYL 725A has been designed for use in automotive interior applications, where anti-squeak is required.

Noryl* Resin EXT130 Asia Pacific: COMMERCIAL

/

Noryl* Resin EXT115 Asia Pacific: DEVELOPMENTAL

/

Noryl* Resin ECN0240 Asia Pacific: DEVELOPMENTAL

/

Noryl* Resin STN15 Asia Pacific: COMMERCIAL

/

Noryl* Resin INT1001 Asia Pacific: DEVELOPMENTAL

/

NORYL™ Resin PVX516 Americas: COMMERCIAL

PREVEX* PVX516 resin is a high flow, non FR grade, 110 C HDT

NORYL™ Resin RN0401 Americas: COMMERCIAL

SABIC NORYL PPO Unfilled High Heat Resistance Noryl RN0401 resin is an unfilled Post Consumer Recycle (PCR) based injection moldable modified polyphenylene ether blend comprising at least 20% PCR content. Available in black only.