> News

News

Say Goodbye to Frequent Repairs and Noise: SABIC LUBRICOMP RX85514 Sets a New Benchmark for Wear-Resistant Engineering Plastics

SABIC LNP LUBRICOMP RX85514 is a high-performance, wear-resistant, self-lubricating engineering plastic based on nylon 66, reinforced with 10% aramid fiber and compounded with 15% PTFE and proprietary lubricants.

SABIC VALOX™ DR48 GY3113: The Ideal Glass-Fiber Reinforced Flame-Retardant PBT for Multiple Industries

With its 17% glass-fiber reinforcement, excellent flame retardancy, high rigidity, and low moisture absorption, SABIC VALOX™ DR48 GY3113 has become a classic material choice across multiple industries. We look forward to leveraging our professional expertise and extensive experience to help you sele......

SABIC ULTEM™ 2310: Why is this PEI called the "All-Round Ace" of high-performance injection molding?

SABIC ULTEM™ 2310 is a 30% glass fiber-reinforced polyetherimide (PEI) resin that combines excellent flowability, ultra-high strength (tensile strength up to 169 MPa), and inherent flame retardancy (UL94 V0 & 5VA). It features a heat deflection temperature of 210–220°C, continuous use from -160°C to......

Why CYCOLOY™ CX7240 is a Reliable Choice for High-Performance, Non-Halogen Flame Retardant PC/ABS

CYCOLOY™ CX7240 is a high-performance, non-halogen flame retardant PC/ABS alloy from SABIC. It combines PC’s heat resistance and impact strength with ABS’s excellent flowability, achieving UL 94 V-0 rating down to 0.75 mm thin wall while complying with RoHS and REACH. With a density of 1.19–1.20 g/c......

The Mountain Remembers, the Wind Remembers, We Remember: Anji Team Building – A Group Goes Further Than One Alone

On May 15-16, the HUNTER team traveled to Anji for a two-day, one-night team building retreat.As we drove back to Shanghai, we carried the mountain breeze in our luggage and the drive back to our desks. Because the best team waits for you uphill, stays with you downhill, and trusts you in Werewolf. ......

SABIC 731S-701S: More Than Toughness, a Choice of Precision

SABIC NORYL™ 731S-701S is a high-flow, high-impact injection molding grade black Polyphenylene Oxide (PPO) material. It is opaque, with a notched impact strength of 80–90 kJ/m² and a heat deflection temperature of 130–135°C. Its melt flow index is more than 50% higher than that of standard PPO, maki......

<1 2 3 4 5...15 >